Gravity Convection

Gravity Convection

Account limit of 2053 requests per hour exceeded.

Gravity Convection

Solar Panels

Solar domestic hot water systems are among the most popular solar technologies considered by those planning to switch to â€œgreenerâ€ technologies or want to reduce their heating bills by making use of a free source. Solar hot water systems differ hugely, depending basically to different climate demands: some are specially designed for moderate and hot climates, and others for colder climates.

Different Solar Systems
Some of these systems useÂ flat-plate collectors, while others useÂ evacuated-tubes collectorsÂ andÂ batch collectors.
Flat-plate solar collectors are the most Used type of solar panels today. Freezing conditions may limit the efficiency of this kind of collectors.Common flat-plate collectors use a liquid (water, glycol) as the heating fluid.They involve a net of flow tubes (where the water or another heating fluid flows), a dark color absorber plate (to absorb the sunlight heat) and a glazing surface. They also comprise an inlet and an outlet connection. Air flat-plate collectors are less common than liquid collectors. As the name implies, they use air as the heating medium, instead of water or other liquid fluid. Their absorber plates are often metal sheets or layers of screen.
Evacuated-tube solar collectors are made up of a set of parallel glass tubes (solar tubes). They are the best collectors for cloudy and freezing climates and for applications demanding high temperatures (evacuated-tube collectors provide temperatures between 75ÂºC and 175ÂºC).Evacuated-tube collectors involve literally a visible set of parallel glass tubes (solar tubes). â€œEvacuatedâ€ means a â€œvacuumâ€ layer within the tubes, where it is also located heat pipes to absorb solar energy and to transfer it to a liquid medium. The vacuum allows very small heat losses and eliminates the impact of ambient temperatures, making evacuated-tube technology particularly suitable for colder climates.
Some solar systems use pumps (active systems) to move the heating fluid while others are based on gravity or natural convection (passive systems).
In some systems there is anti-freezing fluids (glycol, in colder climates), while others use potable water at the collector level.
Closed-loop solar heating systems do not use water into the collectors. Potable water is pumped to the storage tank but never into the solar collectors. Itâ€™s the anti-freezing fluid (often a mixture of water and glycol) that circulates in the solar collectors and through a coil of pipe (in the storage tank) and it is in that coil pipe that the potable water is heated. The anti-freezing supports extremely low temperatures and protects the system from damages caused by severe cold. Glycol should be checked each year and changed regularly every few years (depending on temperatures and glycol quality).
Some systems use integrated tank (the batch solar system) and some use (the thermosyphon system) a storage tank on the top of the collector, while others use auxiliary and backup tanks and well separated storage tanks.
Batch systems do not involve pumps and do no demand a separated storage tank, or anti-freezing, Heat Exchanger, valves, sensors. A batch panel is typically very similar to a flat-plate collector, with a greater depth of at least 6 inches (15 cm). The water is heated directly in the collector (they are open-loop systems) and no pump is used to move the water (they are passive systems).
Their working principle is very basic: whenever the hot water needs to be stored in the batch system, the water pressure moves the hot water on the top of the batch tank (hot water rises naturally to the top of the batch tank).
Thermosyphon systems in their typical configuration do not have pumps and other controls. They are based on the natural convection principle: hot water rises and cold water sinks.Â In the case of thermosyphon systems: as the potable water (or a antifreeze fluid, in colder climates) entered into the collector it warms and rises to the top of the collector and to the tank, where it is stored (thatâ€™s the reason why tanks are always above the collector).

About the Author

John Mahoney is a freelance author who writes about various Renewable Energy realated subjects. For more information about John visit his website
www.techstore.ie.

Real World: How Gravity Affects Molecules